WoodnLuxury is the leading vendor for custom bars, not only because of our unmatchable products and prices but also our customization service. All our bars are customizable by size, color and design. Below are examples of custom versions of Bar WNL53.
Original bar: Custom Mahogany Saloon Pub Bar WNL53
Scroll below to see photos from the factory floor listed by delivery locations.
Get Inspired! Custom Builds of Mahogany Saloon Pub Bar WNL53
- Arvada CO
- Biloxi MS
- Columbus OH
- Granbury TX
- Iowa City IA
- Mason OH
- Mobile AL
- Panton VT
- Quitaque TX
- Saratoga CA
Custom bar delivered to our customer Don in Arvada, Colorado. He cancelled the middle mirror in the upper back bar as he planned to set up a TV there. He also increased the overhang on the front bar to 12 inches. The overall depth of the front bar was 44 inches, the width was 130 inches. The back bar height was increased to 108 inches.
Custom bar built for Danny in Biloxi, Mississippi. He requested a sink in the front bar and increased its overall depth to 30 inches. The overhang was also increased to 10 inches.
Customized saloon bar for Kevin in Columbus, Ohio. He requested columns in place of the female figurines. He also added wine bottle racks in the lower back bar. Note that the carved section at the top of the back bar was eliminated.
Bar delivered to our customer Albert in Granbury, Texas. He reduced the width of the front and back bars to 84 inches. The lower level on the front bar had a dark green marble top and an ice bin.
Customized home bar delivered to Doug in Iowa City, Iowa. You will note columns on the back bar, rather than the female figurines. He also requested a marble-top side unit with a sink.
Saloon pub bar delivered to Don in Mason, Ohio. The overhang on the front bar was 8 inches. The finish was a half-gloss black stain. White marble top was added to both the front and back bars.
Bar delivered to Kyle in Mobile, Alabama. He requested columns instead of the Greek female statues. He also changed the color to black.
Bar WNL53 built for John in Panton, Vermont. The width of both the front and back bars was changed to 96 inches. The carving pediment on top of the back bar was cancelled. And he requested the entire upper back bar would be the same height.
Custom bar delivered in Quitaque, Texas for our customer Ken. The overall width of the front and back bars was 144 inches. The customer requested a space for a fridge in the middle area of the lower back bar.
Custom version of the saloon bar WNL53 delivered to Sharon of Saratoga, California. The width of the front bar was increased to 134 inches to accommodate a sink. Its depth became 32 inches. But the width of the back bar was reduced to 94 inches. It depth was 24 inches.
